coming soon
In-browser flashing works in Chrome or Edge. ⚠️ Disconnect Eurorack power before connecting USB.
Hold BOOTSEL on the module while connecting USB, then click Flash and pick the RP2 device.
Maddie MOD2
Tides
Oscillator · Function Generator
A Mutable Instruments Tides port — a tidal wavetable generator and function source in one.
- Width
- 4 HP
- Depth
- 28 mm
- Power
- +12V / −12V / +5V
- MCU
- Seeed XIAO RP2350
- Controls
- 3 pots · button · LED
- I/O
- 2 gate in · PWM audio out
Overview
A port of Mutable Instruments’ Tides — a tidal wave generator that lives somewhere between an oscillator, an LFO, and a function generator. Shape and slope morph the waveform, and the module runs free as a looping oscillator or fires as an AD / AR envelope when triggered. Output modes cycle through amplitude, phase, frequency, and gate flavours.
Panel & I/O
| Control | Pin | Function |
|---|---|---|
| POT1 | A0 | Shape (waveform shape 0–1) |
| POT2 | A1 | Slope (falling → rising ramp) |
| POT3 | A2 | Frequency (20–2000 Hz) |
| IN1 | D5 | In — Trigger / gate |
| IN2 | D0 | In — Smoothness modulation |
| BTN | D4 | Short = output mode · long = ramp mode |
| OUT | D7 | Out — PWM audio (48 kHz, 16-bit) |
| LED | 13 | Feedback |
Features
- Looping oscillator or AD / AR envelope (long-press ramp modes)
- Output modes: amplitudes, phases, frequencies, gates
- Continuous shape and slope morphing
- 48 kHz, 16-bit PWM output
© 2026 Maddie Synths · firmware based on work by Mutable Instruments (mi_Ugens) · original firmware GPLv3 · hardware design by Hagiwo